Product Information - Trust COMPACT VIBRATION FEEDBACK STEERING WHEEL Manual De Usuario

USER'S MANUAL

Product information

A: Race wheel
B: Feet pedals
C: USB PC connector (PC, Playstation3)
Installation PC
1 (1)Turn on the PC. (2) Connect USB to PC.
2 USB wheel ready to use.
3 Open Game Controllers in Windows Control Panel. Test all functions here.
Note
Force Vibration only works with Playstation2 games supporting vibration.
Analogue and Digital function depends on Playstation2/3 games. Use the mode button to switch
between the two.
Use on Playstation2/3
• Please follow Playstation2/3 instruction manual.
• Buttons 1 – 4 / Δ, O, X,
supporting this function.
• Vibration is not supported on Playstation3
• If the foot pedals doesn't work then customize your controller settings
X, , L1, R1, L2, R2)
Settings for PC and Playstation2/3
Press Select+D-pad (right) to cycle through sensitivity settings:
Level 1: blue LED
4 Level 2: green LED
Level 3: red LED
Note: Level 1 least sensitive and level 6 most sensitive. After few seconds red LED light again.
Press Select+D-pad (up) for 1 second to switch on/off the vibration feedback:
5
All 3 LEDS will flash 3 seconds for confirmation
Feet pedals are hot swappable. Hand levers functions:
6 Pedals connected:
Pedals not connected: Hand levers "F" and "G" function as throttle and brake.
Programming buttons: (Δ, O, X,
Step1: Press Select for 3 seconds
7 Step2: Press button you want to change
Step3: Press button of the function you want to assign
(All 3 LEDS will flash 3 seconds)
All manuals and user guides at all-guides.com
, and hand levers are pressure sensitive, only with Playstation2/3 games
Level 4: blue and green LED
Level 5: green and red LED
Level 6: blue and red LED
Hand levers "F" and "G" have same functions as Δ and O
, L1, R1, L2, R2)
1
D: Playstation2 connector
E: Table clamp
7. Programming buttons: (Δ, O,
UK