EN
Operating instructions
Microphone setup:
Connect the AudioLUX H2 3.5mm microphone
plug into your computer's microphone jack.
Check your sound settings to ensure the
AudioLUX H2 is set as the default input device.
Position the microphone near the user's
mouth. If recordings are too quiet, adjust your
microphone volume and microphone boost
in the levels tab of your microphone settings.
Headphone setup:
Connect the AudioLUX H2 3.5mm headphone
plug into your computer's headphone jack.
Your audio will play through the AudioLUX H2
headset. If you do not hear audio through the
headset, check your computer audio settings to
make sure device playback settings are correct.
Also, try adjusting volume/mute controls on
the headset and computer.
Volume adjustment:
The wheel located on the in-line controller can be
used to adjust volume.
Microphone control:
Move the slider on the in-line controller to the X
position to mute the microphone.
8
