Basement Sentry STBC201 Instrucciones De Instalación página 16

START-UP AND OPERATION
2. Check the controller. The system light should be
green when the unit is plugged into a 115V outlet.
3. NOTE: When the unit is first plugged in, all lights
will flash and an alarm will sound to verify proper
operation. The charger may not begin charging for
several minutes. When the battery begins charging,
the four lights in the circle will turn blue, with the
battery light flashing blue.
4. Once the battery is fully charged, the four lights will turn
green. To clear any other lights or alarms, press and hold
the 'Silence' button for three seconds.
The following LED functions provide a visual cue to the
proper function of the DC pump:
• The DC pump LED will stay yellow after pumping water,
alerting you when the DC pump has turned on and has
pumped water.
• If the the DC pump runs and does not pump water, the
LED will not stay yellow. This can occur during a test of
the system when the float is lifted manually while the
pump is above the water line. This allows the system to
be tested without having to reset it each time.
16
© 2020. All rights reserved.
2
P L U S
AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
All lights
BATTERY
PUMP
will be
green when
plugged
USB
1-800-584-8089
into 115V DC
BasementSentry.com
RESET FLOAT PUMP
outlet
3
Flashing blue light
when charging
P L U S AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC
BasementSentry.com
RESET FLOAT PUMP
4
P L U S
AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC FUSE
BasementSentry.com
RESET FLOAT PUMP 30 AMP
by
TEST
DC
SILENCE
DC POWER
FUSE + 15V DC 1.6A
30 AMP
Solid blue light
when charging
by
TEST
SILENCE
DC POWER
+ 15V DC 1.6A
FUSE
30 AMP
Solid green light
when charged
by
Press to
TEST
silence
alarms
SILENCE
DC POWER
+ 15V DC 1.6A