Phase Linear PCR4500 Manual Del Usuario página 8

OPERATING INSTRUCTIONS
Left/Right Balance Control
5
To adjust the left-right speaker balance, press
the SEL button (5) until the "b" indication
appears on the display panel (if not equally
balanced, "bL" or "br", followed by the balance
level, will appear). Within five seconds, press
the VOLUME buttons (2a and 2b) to adjust the
balance between the left and right speakers
from "bL 15" (full left) to "br 15" (full right). "b 0"
represents an equal balance level between the
left and right speakers.
Rear/Front Fader Control
5
To adjust the front/rear speaker balance, press
the SEL button (5) until "F" appears on the
display panel. Within five seconds, press the
VOLUME buttons (2a and 2b) to adjust the
balance between the rear and front speakers
from "Fr 10" (full rear) to "FF 10" (full front). "F
0" represents an equal balance level between
the rear and front speakers.
FM Mono/Stereo Button
6
(MO/ST)
During FM radio reception, press the MO/ST
button (6) to select mono or stereo reception.
Under normal reception conditions, the unit
should be left in the stereo mode, as indicated
by the "ST" indicator. If the stereo signal is too
noisy for comfortable listening, press the MO/
ST button to switch to mono reception.
Local Button (LOC)
7
During radio operation, received signals are
usually in stereo mode as indicated by the "ST"
icon; however, when the signals are weak or
intermittent, you can activate the Local (LOC)
mode by pressing the LOC button (7). "LOC"
appears on the display. This mode favors
access to local stations whose signals are
much stronger; thereby improving radio
reception. Press the LOC button again to
terminate Local receive mode ("LOC"
disappears from the display panel).
2b 6 2a
11
5 MO/ST
SEL
VOLUME
9 DSP
BAND
TAPE
12
8
Audio Mute (MUT)
8
Press the MUT button (8) to mute the volume
from the system. The display will flash and the
volume will be muted. Press the MUT button
again, press the VOLUME buttons (2a or 2b),
or press the SEL button (5) to return the volume
level to the setting in use before the Mute
function was activated.
NOTE: The local/distant selector only
affects FM signals, and will have no effect
on AM reception.
10
AM / FM / CASSETTE
PCR4500
PCR4500
RELEASE
8
MUT
TUNE
7
LOC
POWER