Parts And Components; Before Use - cecotec READY WARM 9100 SMART TOWEL Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Wall brackets
2. Heating elements
3. Control panel
Control panel
Fig. 4.
1. Standby/Power indicator
2. Comfort mode indicator
3. Heating indicator
4. ECO mode indicator
5. Temperature indicator
6. Standby/On/Off button
7. Mode button
8. Increase button
9. Decrease button
10. Timer button

2. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
3. INSTALLATION
Fig. 2.
Fig. 3.
Drill holes on the wall according to the instructions.
Warning: Be sure to keep the safety distances as shown on the above drawing.
Fit the fastening tube in the hole and fix the bracket on the wall with screws.
Hang the unit on the bracket gently. After ensuring the unit is securely fixed, turn the lock in the
bracket as shown on the drawing.
Warning: Before using the heater, make sure it is mounted tightly on the wall.
28 READY WARM 9100 SMART TOWEL WHITE /STEEL / BLACK
4. OPERATION
Plug the device to a power supply. The device will beep and the power indicator will light up.
Press the on/off button to turn the device on. When operated for the first time, the device will
operate with default settings.
Press the on/off button to turn the device off.
Unplug the device from the power supply when not in use.
Setting time and day of the week
Hold down the timer button for 3 seconds to enter the clock and day settings.
The screen will display "d". Use the "+" and "-" button to select the day, from 1 to 7.
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Sunday
Press the timer button to confirm the current day and enter the clock hour setting. The display
will show Fig. 5.
Press the "+" and "-" buttons to set the current hour.
Press the timer button to confirm the current hour and enter the clock minute setting. The
display will show Fig. 6.
Press the "+" and "-" buttons to set the current minutes.
Press the timer button to confirm the settings.
Note: The clock and calendar will be reset to factory default when there is a power supply cut.
Heating mode
Press the mode button to enter mode selection. Press the mode button repeatedly to set the
desired mode:
Fig. 7.
Comfort mode:
Press the "+" and "-" buttons to set the desired temperature, from 5 ºC to 35 ºC.
Eco mode:
Press the "+" and "-" buttons to set the desired temperature, from 1 ºC to 31 ºC.
Note: Eco mode=Comfort mode – 4ºC.
Anti-frost mode:
The display will show "Fr". The target temperature is 7 ºC. Temperature cannot be adjusted
under this mode.
READY WARM 9100 SMART TOWEL WHITE /STEEL / BLACK
ENGLISH
29