Speedlink GameCube Manual De Instrucciones página 8

PROGRAMMING THE GAME CUBE" STEERING WHEEL:
The Steering Wheel is fully programmable, for users to customize the
Steering Wheel with their own preferences, or games that are not corre-
spond to the Steering Wheel default setting.
The programmed setting will be stored in the GAME CUBE" Steering Wheel
even the Steering Wheel is disconnected or the GAME CUBE" is powered off.
So you don t have to program each time at the beginning of the game.
Program a button:
1. Press the PROGRAM button on the console panel once, the program LED
will turn on.
2. Press the button you want the function to be cloned, the program LED will
blink.
3. Press the button you want to re map the function, the program LED will
be turned off, the programming is completed.
For example, if you want to apply the Z button function to the F 1 Gear Shifter
1. Press the PROGRAM button, the program LED turns on.
2. Press the Z button, the program LED blinks
3. Pull the F 1 Gear Shifter R, the program LED turned off.
Programming is finished.
Erase the programmed setting:
If you have to erase the programmed setting and restore the factory setting,
you have to:
Press and hold the PROGRAM button for about 3 seconds, until the program
LED blinks twice.