Yealink RoomCast Guia De Inicio Rapido página 4

4
Connection
Note: The USB port is used to connect the WPP20 to pair with the RoomCast manually If you
purchase the WPP20 separately or the RoomCast Access Point is modified.
5
Setting Up RoomCast
After the RoomCast is powered on, you can perform basic settings,
network configuration and system settings through the web user
interface:
• If you connect to a wired network ：
① Connect the PC to the same LAN .
② Open a web browser and enter the device IP address (displayed in the
bottom-right corner of the display) in the address bar.
The default administrator username is "admin"and password is "0000".
• If you do not connect to the network ：
① Connect the PC to the wireless AP provided by RoomCast.
(The AP name and password are displayed on the display, and the default
name is Yealnk XXX)
② Open a web browser and enter the device IP address (192.168.144.1) in
the address bar.
The default administrator username is "admin"and password is "0000".
Note: If you do not connect to a wired network, you can connect to the wireless network after
accessing the web user interface through the above methods..
TV