Troubleshooting - T-Fal BeerTender B80 Manual De Instrucciones

6

Troubleshooting

Problem
The appliance The appliance is
does not come not connected to
on. the outlet.
You cannot You may have
position the tap opened the
cover correctly. draught beer tube
(white plastic part
at the end of the
serving tube) by
hand. If so, the
tap cover will not
close correctly
and there is a risk
for the beer to
flow out.
You cannot The DraughtKeg
position the tap tap or tube is not
cover correctly. inserted correctly.
No beer is being The appliance is
dispensed. off.
13 13
Possible causes
TM
Remedies
Connect the
appliance to the
outlet.
Before installing the
draught beer tube
onto the
BeerTender®
tapping mechanism,
make sure that the
draught beer tube is
closed.
If the draught beer
tube is not installed
properly in the
tapping mechanism
or if the tube is
pinched,
this will affect the
beer flow. Please
refer to Section 5:
Using the
BeerTender System
to check that you
have properly set
up the BeerTender.
Switch the
appliance on.