Geba Tronic Cody Light HF 1/1 Manual De Instrucciones página 16

Keypad
Creating a new pass code
Cody Light HF 1/1 (up to 4 pass code for the relay output)
The four possible pass codes are programmed in the easiest way.
There are four DIP switches on the logic unit (see picture below). These four DIP switches correspond
to the four memory slots for each pass code.
Cody Light HF 1/2 (maximum 2 pass codes for each relay output)
The stored pass codes with the DIP switches 1 and 2 activate the output relay 1
The stored pass codes with the DIP switches 3 and 4 activate the output relay 2
Put DIP of the
desired memoy
slot to ON
The new pass code is now saved!
Deleting a pass code
Put DIP of the
desired memoy
slot to ON
The selected memory slot of the pass code
Enter 4 or 5
digit pass code
Set all DIP to
OFF
push
button
Set all DIP to
OFF
is now deleted!
push
button
push
button
sound signal
1x long
sound signal
1x long