Tabla de contenido
2.7 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATAII Connectors
(SATA2_0: see p.2, No. 10)
(SATA2_1: see p.2, No. 8)
(SATA2_2: see p.2, No. 12)
(SATA2_3: see p.2, No. 11)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB6_7)
(see p.2 No. 15)
(9-pin USB8_9)
(see p.2 No. 16)
Print Port Header
(25-pin LPT1)
(see p.2 No. 18)
ASRock H61M-HVGS / H61M-HVS Motherboard
SATA2_3
SATA2_1
SATA2_2
SATA2_0
USB_PWR
P-9
P+9
GND
DUMMY
1
GND
P+8
P-8
USB_PWR
SPD1
SPD2
SLCT
SPD3
PE
SPD4
BUSY
SPD5
ACK#
SPD6
SPD7
SLIN#
GND
PINIT#
ERROR#
These four Serial ATAII
(SATAII) connectors support
SATA data cables for internal
storage devices. The current
SATAII interface allows up to
3.0 Gb/s data transfer rate.
Either end of the SATA data
cable can be connected to the
SATA / SATAII hard disk or the
SATAII connector on this
motherboard.
Besides six default USB 2.0
ports on the I/O panel, there
are two USB 2.0 headers on
this motherboard. Each
USB 2.0 header can support
two USB 2.0 ports.
This is an interface for print
STB#
SPD0
port cable that allows
convenient connection of printer
1
devices.
AFD#
21
Tabla de contenido
