Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Switch both the enlarger lamp and the
ColorLine 100 on
•
Open lens aperture to full
•
Position the ColorLine 100 in the centre of
the baseboard image
•
Ensure fine adjustment controls are at mid
position
•
Swing diffuser under lens
•
Switch off the darkroom lights and safe-
light
•
Adjust yellow and magenta calibration
controls with the screwdriver supplied until
all the LED indicators are off - you may
need to re-adjust each control once or
twice.
Your ColorLine 100 is now calibrated for your
paper and processing.
Note: If your ColorLine 100 is switched on first
in complete darkness, it may take up to 1 minu-
te to stabilise.
Remedy: Please put the measurement cell
directly under the lens for a few seconds.
15
Capítulos
Tabla de contenido
