AnMo Electronics Dino-Lite Manual De Usuario página 10

Polygon
Radius
Diameter
Three point
circle
Three point
arc
Three point
angle
Four points
angle
Center
distance
Gridlines
Circle grid
Crosshair on
camera
Scale
crosshair
Text and line tools
Line format
Font
Click and drag to form the desired length, and click
again to start the next section. When finished,
double click to finish the polygon measurement.
Click and extend out to the desired radius.
Click and extend out to the desired diameter.
Click on any three points on the circle you wish to
measure.
Click on three consecutive points on an arc to
measure.
Start at the pivot point and extend out to start
measuring an angle.
Select two points from one line segment and
another two points from another line segment to
complete the angle measurement.
After drawing at least two circles, select the icon
and the mouse pointer will change to a pointing
finger for selectable circles. Click on each circle and
the software will measure the distance.
The pitch will match the magnification inputted.
The pitch will match the magnification inputted.
The crosshair XY position can be moved when
you select it. The cursor position is the location of
the mouse pointer and location 0,0 is the centre
coordinates of the crosshair.
The scale crosshair increments can be compared to
the scale on the bottom left corner. The centre of
the crosshair can be moved. (Magnification value
needs to be entered for this feature to work).
Select line color, style and width
Select font, font style, size and color
DinoCapture 2.0 User manual
English 9