Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY ADVICE
• Do not leave wrapping material and plastic foil carelessly around. Plastic bags etc. can become
a dangerous toy for children.
• Keep this LED flashlight out of the reach of children. It is not a toy and is not suitable for children
under 14 years.
• Do not use the lamp under or in the water.
• Caution: The light from this lamp could endanger your eyes. For this reason, do not look directly
into the LED beam and do not direct the light beam directly against the eyes of humans or
animals.
• It is not allowed to use optically strongly bundling instruments for viewing into the light beam.
• Do not disassemble the lamp or thrown into the fire.
• Do not use the lamp if it is damage or has any malfunction, and do not attempt to repair it
yourself.
OPERATION
1
Status display
2
Charging socket cover
3
Switch
4
Charging socket (input)
5
Charging socket USB A (output)
SWITCH
Press the switch (3) to turn on the lamp and select the color temperature.
Press switch once, COB LED lights up with cold light.
Press the switch twice, the COB LED changes from cold light to warm light.
Press the switch again, to switch the COB LED off.
When lamp is switched on, hold the switch for more than five seconds, the light color changes
continuously, depending on the output color, from cold light to warm light or vice versa. When the
maximum / minimum color temperature is reached, the COB LED flashes twice and the stepless
adjustment of the color temperature automatically reversed. When the switch is released, the color
temperature remains until the lamp is switched off.
CHARGING
Remove the cover (2) of the charging sockets.
Plug the supplied charger into an electrical outlet and connect
the charging cable to the charging socket (4) on the back of
the lamp.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
1
2
4
3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
1
5
Tabla de contenido
