WARNING: To reduce the risk of burns, electrocution, fire, or injury
to persons:
When not in use, unplug the tool.
1.
The tool is hot when in use.
2.
Do not place the heated tool directly on any surface while it is hot
3.
or plugged in.
An appliance should never be left unattended while plugged in.
4.
Close supervision is necessary when this appliance is used by, on, or
5.
near children or individuals with certain disabilities.
Use this appliance only for its intended use as described
6.
in this manual.
Never operate this appliance if it has a damaged cord or plug.
7.
Never allow the power supply cord to be pulled, jerked, strained, twisted,
8.
or severely bent, especially at the plug connections. Damage will occur
at the high flex point of entry into the appliance, causing it to rupture and
short. Handle the cord carefully for longer life.
Keep the cord away from heated surfaces. Do not wrap the cord around
9.
the appliance.
10.
Never drop or insert any object(s) into any opening.
11.
Do not use outdoors or operate where aerosol spray products are being
used or where oxygen is being administered.
12.
Do not use an extension cord with this appliance.
13.
Never use while sleeping.
14.
Do not operate with voltage converter.
15.
This appliance is provided with a protective device that may make it
inoperable under some abnormal conditions (such as immersion
of the appliance).
16.
If appliance is not working properly, or it has been dropped, damaged,
or has fallen into the water, return the appliance to a service center for
examination and repair.
17.
This appliance is provided with a protective device that may make it
inoperable under some abnormal conditions (such as immersion
of the appliance).
18.
Never place the appliance on a soft surface, such as a bed or couch.
19.
Do not direct hot titanium attachments toward eyes, skin or other heat
sensitive areas.
20.
Do not place the tool on heat sensitive surfaces while it is in operation.
21.
Do not leave tool in hot humid places.
3