fourstargroup 11225134A Instrucciones De Montaje

MODEL: 11225134A
MESH BACK DESK CHAIR
FOR HOUSEHOLD USE ONLY
STEP 1
ATTACH CASTORS (A) ONTO BASE (B), ATTACH GAS
LIFT(C) AND TELESCOPIC COVER (D) PLACE ONTO THE
BASE (B) AS SHOWN.
C
B
A
STEP 2
ATTACH SEAT PLATE (E) TO SEAT (G) USING SMALL
BOLTS (H) AND ALLEN WRENCH (J) AS SHOWN, MAKE
SURE "FRONT" LABEL ON THE SEAT PLATE (E) FACES
TOWARD THE "FRONT" LABEL ON THE SEAT (G).
J
H
G
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT
DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your MESH BACK DESK CHAIR please e-mail our
[email protected]
Customer Service Department at:
or call us at (800) 639-3803 or (508) 473-7688
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 3
ATTACH MESH BACK (F) TO SEAT (G) USING SMALL
BOLTS (H) AND LARGE BOLTS (I) AS SHOWN USING
PROVIDED ALLEN WRENCH (J).
H J
F
J
I
F
PARTS LIST AND HARDWARE
NO PARTS LIST AND HARDWARE QTY NO
5 PCS
A F
CASTOR MESH BACK
B 1 PC G
BASE SEAT
C 1 PC H
GAS LIFT SMALL BOLT
1 PC
D I
TELESCOPIC COVER LARGE BOLT
E 1 PC J
SEAT PLATE ALLEN WRENCH
STEP 4
INSERT (STEP 1) FINISHED PARTS INTO THE HOLES IN
THE UNDERSIDE OF (STEP3) FINISHED PARTS AS
SHOWN.
PARTS LIST AND HARDWARE QTY
1 PC
1 PC
6 PCS
E
2 PCS
A
1 PCS
A
IMPORTANT SAFEY INSTRUCTIONS
Definitions
Whenever used, the following terms identify safety and
property damage messages and designate a level of hazard
seriousness.
This is the safety alert symbol. It alerts you to potential
personal injury hazards.
Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER- Indicates an imminently hazardous situation
which if not avoided, will result in death or serious injury.
Usage of this signal word is limited to the most extreme
situations.
WARNING- Indicates a potentially hazardous situation
which if not avoided, could result in death or serious
injury.
CAUTION- Indicates a potentially hazardous situation
which if not avoided, could result in minor/moderate
injury.
NOTICE- Addresses practices not related to personal
injury, such as product and/or property damage.
READ ALL INSTRUCTIONS BEFORE USE
WARNING- To reduce the risk of fire, electric shock, or
serious personal injury.
• Do not exceed the maximum weight limit of 220lbs
(100kg) on the product.
• Do not sit on either Armrest.
• Do not step or stand on the product.
CAUTION- To reduce the risk of personal injury.
• Make sure the product is properly assembled and all
parts secured before sitting on it.
• Regularly inspect the chair for loose Bolts, damage,
instability or wear. Tighten any loose Bolts and make sure
all parts are secure.
• This product is intended solely for indoor, non
commercial use in supporting a seated individual whose
weight doses not exceed 220lbs. Do not use the product
outdoors or for any other purpose.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
F
G
D
A
B
A
A