Tabla de contenido
2.8.1.2 Installing Three CrossFireX
Step 1.
Install identical 3-Way CrossFireX
certifi ed because different types of graphics cards will not work together
properly. (Even the GPU chips version shall be the same.) Insert one
graphics card into PCIE1 slot, another graphics card to PCIE3 slot, and
the other graphics card to PCIE5 slot. Make sure that the cards are prop-
erly seated on the slots.
Step 2.
Use one CrossFire
PCIE1 and PCIE3 slots, and use the other CrossFire
the Radeon graphics cards on PCIE3 and PCIE5 slots. (The CrossFire
Bridge is provided with the graphics card you purchase, not bundled with
this motherboard. Please refer to your graphics card vendor for details.)
CrossFire
Step 3.
Connect the DVI monitor cable to the DVI connector on the Radeon graph-
ics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert
the DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)
ASRock Z77 Extreme9 Motherboard
TM
-Ready Graphics Cards
TM
-ready graphics cards that are AMD
TM
Bridge to connect the Radeon graphics cards on
TM
Bridge
®
TM
Bridge to connect
TM
33
Tabla de contenido
