Elma 27.15.1 Guia De Inicio Rapido página 10

02. INSTRUCTIONS FOR USE.
IMPORTANT
- The gas cylinder must have a capacity of 5 -
13kg.
- The regulator must be 28 mb for butane and 37
mb for propane.
- The hose must be a maximum of 1.5m long and
comply with the UNE standards. Ensure that there
are no bent sections.
- Check the expiry date of the hose and replace it
when necessary.
4. Next, turn the knob fully to the left and put it in
the " " position until the device turns on. If it does
not turn on, repeat this operation. (fig. C1)
5. Move the knob and adjust the flame to the de-
sired position.
Warning! Exercise extreme caution so as not to
burn yourself.
6. Turning the gas valve adjusts the intensity of
the flame independently.
7. Proceed to place the cooking utensil on the
grill of the portable stove.
03. MAINTENANCE AND WARNINGS.
MAINTENANCE
For a long lifespan, the device requires regular
maintenance. Clean the device when it is cool,
using a cloth moistened in soapy water or noon-
abrasive liquid detergents. After cleaning, ensu-
re that the gas outlet openings of the burner are
not obstructed.
ATTENTION
If turning the gas control valve on or off becomes
different or does not work, do not force or repair
it. Request technical assistance immediately.
Regularly review the state of repair of the devi-
ce, and if necessary, visit the official technical
service.
When the device is not being used, keep it in its
bag in a safe, dry place.
10
IMPORTANT AFTER USE
• Turn the knob to the "OFF" position (fully to
the right)
• Check that the stove is turned off before re-
moving the connector.
• For your own safety, we remind you to al-
ways remove the gas cylinder connector.
• Once the stove has fully cooled:
1. After use, the stove must be cleaned well, elim-
inating all food and fat residue.
2. Place the drip tray so that both the drip tray
and the supports are face down and place the
portable stove in the transport bag included.
3. Do not modify the device.
CAUTION
Some accessible parts may reach high tempera-
tures: use protective gloves and keep the device
away from children.
FAULT RESOLUTION
Problem Solution
Gas is not • Check that the gas
released cartridge is correctly
installed.
• The gas cartridge is
empty, replace it with a
new one.
It does not turn • Clean the head of the
on burner with a brush.
• Check that the piezo
electric component is in a
good state of repair.