West Elm Degraw Dining Bench Instrucciones De Ensamblaje

Enlaces rápidos

CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To
protect nish, avoid the use of chemicals and household cleaners. All hot serving dishes should be placed on a
pad. Any liquid spilled onto the table should be cleaned up immediately with a damp cloth. Do not use surface
cleaners that have properties that would remove the wax nish.
Matériel peut desserrer les heures supplémentaires. Véri ez régulièrement que toutes les connexions sont bien serrées.
Essuyez avec un chi on doux et sec. Pour protéger le ni, éviter l'utilisation de produits chimiques et aux nettoyants domes-
tiques. Tous les plats chauds portion devrait être placée sur un coussin. Tout liquide renversé sur la table doit être nettoyée
immédiatement avec un chi on humide. Ne pas utiliser des nettoyants de surface qui ont des propriétés qui supprimerait la
nition à la cire.
Hardware puede a ojar las horas extraordinarias. Revise periódicamente que todas las conexiones estén bien ajustadas.
Limpie con un paño suave y seco. Para proteger el acabado, evite el uso de productos químicos y productos de limpieza.
Todos los platos calientes de distribución deberá ser colocado en una almohadilla. Que el líquido derramado sobre la mesa
debe limpiarse inmediatamente con un paño húmedo. No utilice limpiadores de super cies con propiedades que se elimi-
naría el acabado de cera.
loading

Resumen de contenidos para West Elm Degraw Dining Bench

  • Página 1 CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners. All hot serving dishes should be placed on a pad. Any liquid spilled onto the table should be cleaned up immediately with a damp cloth. Do not use surface cleaners that have properties that would remove the wax nish.
  • Página 2 1. With help lay the bench top upside down onto a clean smooth surface such as carpet or cardboard. Align the leg frames as shown. Insert bolt (A), lock washer (C), and at washer (B) through the side rails of the seat and into the leg frame as shown.
  • Página 3 2. If the oor is uneven, adjust the recessed levelers found underneath the legs. Carefully grasp one side of the bench and elevate it slightly to provide access to the levelers. Turn the levelers until adequate contact is made with the oor. 2.