Bigben RCUBE Instrucciones De Funcionamiento página 20

Switching on the device:
Connect the adapter to the mains, making sure the connection is correct. Then connect the
DC output plug of the adapter to the jack port on the bottom of the alarm clock. The display
shows two digits "00".
Using the device:
Setting the time
Press the < Set time
upper two digits flash
Press the < Increase
- Press the < Set time
minutes. The upper digits stop flashing and the lower digits flash.
- L ong-press the < Increase > or < Decrease > button to set the alarm clock in fast mode in
10-minute steps
- Press the < Increase
Press the < Set time
and the display changes to selecting the time format. The upper digits indicate "12" or "24".
Press the < Increase
"pm" or "am" appears in the lower left corner.
> button for more than 2 seconds to enter time setting mode. The
> or < Decrease
> button again to confirm the hour and move on to setting the
> or < Decrease
> button again to confirm the minutes. The lower digits stop flashing
> button to switch between 12 and 24 modes. If "12" is selected,
- EN 20 -
> button to set the hour.
> button to set the minutes.