West Elm preston media console Instrucciones De Ensamblaje

Enlaces rápidos

Parts/Pièces/Herrajes
Anti tip kit 2x
Nylon Strap 2x
Mounting Plate 4x
Small Screw 4x Large Screw 4x
loading

Resumen de contenidos para West Elm preston media console

  • Página 1 Parts/Pièces/Herrajes Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x...
  • Página 2 1. Align base with end panels as shown. Insert dowels (C) and screw in cam bolts (A) inot end panels. Insert cam locks (B) into the bottom of the bottom panel. Press the end panels rmly onto the bottom panel. Lock cam locks with screwdriver by turning them clockwise.
  • Página 3 2. Slide thin back panel into grooves in end panels and bottom panels. 2. Glissez le panneau arrière minces dans les rainures des panneaux latéraux et de panneaux de fond. 2. Deslice el panel trasero delgada en las ranuras de los paneles de cierre y los paneles de fondo.
  • Página 4 3. Remove drawer from drawer box as shown. Pull the drawer completely out and lift the plastic tabs on both the drawer guides as shown. Then pull drawer completely out and set aside. 3. Retirer le tiroir de la boîte de tiroir, tel qu’illustré. Tirez complètement le tiroir et de soulever les languettes en plastique sur les glissières de tiroirs, comme illustré.
  • Página 5 4. Insert dowels (C) into the top of the end panels as shown. Align drawer box with the dowels. Press down rmly onto the dowels. Insert bolts (D), lock washer (F) and at washer (E). Tighten with hex key (G). 4.
  • Página 6 5. Align drawer with drawer box and guides. Press rmly to re-install drawer. Insert shelf pins (H). Align shelf with pins. 5. Aligner tiroir avec la boîte de tiroir et des guides. Appuyez fermement pour re-installer le tiroir. Épingles insérer la tablette (H). Aligner plateau avec des épingles. 5.
  • Página 7 NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes.

Este manual también es adecuado para:

674739