Technical Data; Safety Instructions - Desoutter ERS Manual De Instrucciones

6159921160_08
Original instructions.
© Copyright 2018, Ets Georges Renault 44818
St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is intended to be connected to CVI3
controllers to allow managing ERS tools and
ERPHT tools.
No other user permitted.
For professional use only.
EMC restriction of use: for industrial use only.

TECHNICAL DATA

Normal environmental conditions
(for IEC 61010-1 standard).
Operating temperature 5°C to 40°C.
Maximum relative
humidity
Category equipment
Altitude up to
Usable in Pollution
degree 2 environment

SAFETY INSTRUCTIONS

Class A digital device
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and,
if not installed and used in accordance with
the instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely
to cause harmful interference in which case the
user will be required to correct the interference at
his own expense.
Any changes or modifications to this
equipment not expressly approved by
CP GEORGES RENAULT may cause, harmful
interference and void the FCC authorization to
operate this equipment.
41°F to 104°F.
80% for temperatures
up to 31°C.
II
2,000 m
Indoor use only.
ERS / ERPHT adapter must be connected
only to a CVI3 Function or a CVI3 Vision
controller.
To connect ERS / ERPHT adapter to
TWINCVI3 controller, contact your local
Desoutter representative.
INSTALLATION
Connecting ERS / ERPHT adapter to CVI3
controllers
A
See page 4.
Switch off the controller before
disconnecting:
● The tool cable.
● The adaptor from the controller.
Connecting tool cable and extension cable
(optional)
B
See page 5.
1. ERS / ERPHT adapter
2. Extension cable
3. ERS tool
4. ERPHT tool
5. Tool cable
Extension
Tool cable
(Optional)
ERP250 5 m
ERP500 (6159172220)
ERP750 10 m
ERP1000 (6159172240)
ERP1700
ERS2 5 m
ERS6 (6159172220)
ERS12 10 m
ERS2-M20 (6159172240)
ERS6-M20
ERS12-M20
ERS22-M20 ERSA2
ERSA6
ERSA12
ERSA27
ERSF6
ERSF12
8 / 60
English
Tool cable
3 m
(6159174610)
5 m
(6159174620)
10 m
(6159174640)
15 m
(6159174650)
Already
attached to
tool.
09/2020