THANK YOU We appreciate the trust and confidence you have placed in Premier through the purchase of this toilet. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your...
Premier products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Premier products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Pre-Installation PLANNING INSTALLATION Before beginning installation of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for replacement parts.
Installation Removing the old toilet Installing the floor bolts □ □ Turn off the water supply and flush the tank completely. Insert the floor bolts (AA) into the slots on the toilet flange Towel or sponge remaining water from the tank and bowl. (1) with the bolt heads down and threaded ends facing up.
Installation (continued) Installing the wax ring Installing the toilet □ □ Turn the toilet bowl (B) upside down onto a towel or Place the toilet bowl (B) over the toilet flange (1) in cushioned surface. With the rounded (tapered) end of the alignment with the floor bolts (AA) so they protrude through wax ring (CC) facing the toilet, place the wax ring (CC) the slots on the base of the toilet bowl (B).
Installation (continued) Installing and adjusting the flush Connecting the water supply line button □ □ Position the flush button mechanism (QQ) in tank lid so the Connect the water supply line (not included) between the single drop button will align with blue button (half flush) on tank portion of the toilet (B) and shut-off valve.
Installation (continued) Installing the seat with lid □ Turn the toilet seat with lid (C) upside-down. □ Insert the lock-bolt (GG) in the bolt trough (1), then adjust the lock-bolt (GG) to make the hole distance match with the toilet. □...
Troubleshooting (continued) REMOVING VALVE CAP ASSEMBLY Turn off water supply and flush out tank. Push float up with right hand (see picture). Grip and hold shaft under float with right hand. With left hand, twist cap and lever counter clockwise 1/8 of a turn to unlock the top cap.
Página 10
Questions, problems, missing parts? Before returning to the store, call Premier Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-831-8383 PREMIERFAUCET.COM Retain this manual for future use.
INODORO ALONGADO DE DOBLE DESCARGA DE 1 PIEZA DE ALTA EFICIENCIA ¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame al Servicio a Clientes de Premier de lunes a viernes entre 8 a.m. y 6 p.m., hora local del Este 1-800-831-8383 PREMIERFAUCET.COM ...
GARANTÍA DE POR VIDA LIMITADA Los productos de Premier están fabricados con normas y mano de obra de calidad superior y están respaldados por nuestra garantía de por vida limitada. Los productos de Premier están garantizados al comprador consumidor original de estar libres de defectos en materiales o mano de obra.
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de comenzar a instalar este producto, asegúrese de que todas las partes estén presentes. Compare las piezas con el herraje incluido y las listas de contenido del paquete. Si hace falta alguna parte o se encuentra dañada, no intente ensamblar, instalar u operar el producto. Póngase en contacto con servicio al cliente para las partes de reemplazo.
Instalación Extracción del inodoro viejo Instalación de los pernos de piso □ □ Cierre el suministro de agua y descargue por completo el tanque. Inserte los pernos de piso (AA) en las ranuras de la brida del Con una toalla o esponja retire el agua remanente del tanque y inodoro (1) con las cabezas de los pernos hacia abajo y los taza.
Instalación (continuación) Instalación del anillo de cera Instalación del inodoro □ □ Ponga la taza del inodoro (B) boca abajo sobre una toalla o Coloque el inodoro (B) sobre la brida (1) alineado con los pernos superficie acolchonada. Con el extremo redondeado (ahusado) de piso (AA) de modo que sobresalgan a través de las ranuras en del anillo de cera (CC) hacia el inodoro, coloque el anillo de cera la base del inodoro (B).
Instalación (continuación) Instalación y ajuste del botón de Conexión de la línea de suministro descarga de agua □ □ Ubique el mecanismo del botón de descarga (JJ) en la tapa del Conecte la línea del suministro de agua (no incluida) entre la tanque de modo que el botón de una sola caída se alinee con la parte del tanque del inodoro (B) y la válvula de cierre.
Instalación (continuación) Instalación del asiento con tapa □ Ponga el asiento del inodoro con la tapa (C) boca abajo. □ Inserte el perno de seguridad (GG) en el perno pasante (1), luego ajuste el perno de seguridad (GG) para hacer que la distancia del agujero coincida con el inodoro.
Resolución de fallas (continuación) SAQUE EL CONJUNTO DEL TAPÓN DE LA VÁLVULA Cierre el suministro de agua y vacié el tanque. Empuje el flotador hacia arriba con la mano derecha. Agarre y sostenga la espiga bajo el flotador con la mano derecha. Con la mano izquierda gire la tapa y la palanca en SEAL dirección contraria a las manecillas del reloj un octavo...
Página 20
¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame al Servicio a Clientes de Premier de lunes a viernes entre 8 a.m. y 6 p.m., hora local del Este 1-800-831-8383 PREMIERFAUCET.COM Conserve este manual para uso futuro.