Uline H-2303 Manual De Instrucciones página 4

KEYPAD OPERATORS
START
START
This button operates as Start button for normal operation.
• Motor START from the panel; active control place has to be selected at "Panel."
ENTER
This button in the parameter edit mode is used to enter the programming mode and to enter the
ENTER
parameter selection.
• Used for parameter edit confirmation, acceptance (confirmation) of the edited parameter value
with exit from parameter edit mode.
STOP/RESET
This button has two integrated operations. The button operates as stop button for normal operation.
In the parameter edit mode it is used to cancel previous action and back-up one step, and in fault
mode it is used to reset the fault.
STOP
STOP
• Motor STOP from the panel; active control place has to be selected at "Panel."
RESET
RESET
• Used for active fault resetting
- Fault history is reset if ENTER is pressed on the "Fault History" menu group in "Main Menu" or
if ENTER is pressed while in the "Fault History" menu.
• In programming mode, press RESET key to cancel previous action and back up one step.
LEFT Arrow
• Navigation button, movement to left. -
• In display mode, enter parameter group mode.
• In parameter edit mode, exits mode, back up one step.
• Cancels edited parameter (exit from a parameter edit mode).
RIGHT Arrow
• Navigation button, movement to right.
• Enter parameter group mode.
• Enter parameter mode from group mode.
UP and DOWN Arrows
• Move either up or down the group list in order to select the desired group menu.
• Move either up or down the parameter list in order to select the desired parameter in the group.
• Increasing/decreasing of reference value on the keyboard (when selected).
SPEED POTENTIOMETER
• Increase/decrease reference value on the keypad (when selected).
PAGE 4 OF 24 0517 IH-2303