Getting Started - Unpacking; Items Supplied; Additional Accessories - Evolution TWISTER Instrucciones Originales

www.evolutionpowertools.com
firmly by the insulated handles which
have an ergonomic gripping surface
incorporated into their upper edge.
• Safety eye goggles or a full face mask
should always be worn to provide
protection from material that could be
accidentally ejected from the mixing tub
during mixing operations.
• A dust mask should be worn to provide
protection from any material that may be
ejected from the mixing tub, especially
during the initial mixing process.
• The machine should only be started with
the mixing paddle in the mixing tub.
Start the machine with the speed set at
the lowest speed setting and gradually
increase the speed until the optimum
mixing performance is achieved.
• Once the mixing process is completed, the
operator should use the Speed Adjustment
Wheel to set the motor to its lowest speed
setting, and then switch 'off' the motor
with the mixing paddle still in the mixing
tub. The mixing paddle should be allowed
to come to a complete standstill before the
machine is removed from the mixing tub.
• The operator should never reach into the
mixing tub or insert any other objects or
tools into the mixing tub while mixing
is in progress.
• This machine should not be used in
environments with a potentially explosive
atmosphere. This could include factories,
garages and other enclosed spaces
(bakeries, grain silos etc) which may
contain significant amounts of airborne
dust or other particles.
• This machine should not be used to mix
any readily flammable solvents or solvent
containing substances with a flash point
of below 21° C.
• During operations if the machine is to be
stored temporally (by being placed on
a horizontal work surface), the operator
must ensure that the machine is placed
on its handles with the paddle providing a
third contact point. The supply cable must
be pointing vertically upwards and not
trapped underneath the machine.
(4.1)

GETTING STARTED - UNPACKING

Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all
the accessories are complete. If any parts
are found to be missing, the machine and its
accessories should be returned together in
their original packaging to the retailer. Do
not throw the packaging away; keep it safe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible.
Do not let children play with empty plastic
bags due to the risk of suffocation.
(4.2)

ITEMS SUPPLIED

Description
Instruction Manual
Hand Held Twister Motor Unit
Mixing Paddle (2 piece)
Spanner
(4.3)

ADDITIONAL ACCESSORIES

In addition to the standard items supplied
with this machine the following accessories
are also available from the Evolution online
shop at www.evolutionpowertools.com
or from your local retailer.
(4.4)
Description
Replacement Paddle
9
Quantity
1
1
1
1
Part No
TWISTERPADDLE
EN