Manuales relacionados para Techni Mobili RTA - B002
Resumen de contenidos para Techni Mobili RTA - B002
- Página 1 MODEL RTA - B002 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. MODEL RTA-B002...
- Página 2 MODELO RTA - B002 Gracias por comprar uno de nuestros productos. Por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad. Por favor guarde este manual para referencias futuras. MODELO RTA-B002...
- Página 3 RTA-B002 DIMENSIONS Lowest position Highest position Product Size: 22"W x 16"D x 30.5~46.5"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface...
- Página 4 Plastic Cover Pieza pl stica á Screw Knob Tornillo de ajuste...
- Página 8 Use Bolts D to fix the Mid Panel (6), Back Panel (4) & Front Panel (5) to the Left Panel (1). Make sure to tighten the cam locks on the inside face of the Panels (6,4&5) to secure the bolts. Use los Pernos de Ajuste D para fijar el Panel Medio (6), Panel Posterior (4) y el Panel Frontal (5) al Panel Izquierdo.
- Página 9 Use Bolts D to fix the Bottom Panel (7) to the semi structure built in Step 2 making sure to tighten the cam locks on the inside face of the Panels (1,4&2) to secure the bolts. Use Pernos de Ajuste D para fijar el Panel Inferior (7) a la semi estructura que ensablamos en el paso 2 Asegurese de ajustar los cerrajes en la cara posterior de los Paneles (1.
- Página 10 P.10 Use Bolts D to assemble the Top Panel (8) over the Back, Left and Right Panels (4,1,2). Make sure to tighten the cam locks on the inside face of each panel. Use Pernos de ajuste D para ensamblar al Panel Superior (8) sobre los paneles Derecho, Izquierdo y Posterior (4,1,2).
- Página 11 P.11 Place the Plastic Cover (11A) on top of the Lateral Structure Tubes (9). Coloque la pieza plastica (11A) sobre los tubos de la Estructura Lateral (9). Insert the Top Structure Tubes (10) into the Plastic Cover (11A), then screw in the Knob (11B) into the Plastic Cover (11A).
- Página 12 P.12 Tighten all screws well and enjoy your unit. You can adjust the height of the main panel with the screw knobs. Use Screws B to fix the Protector Tube (13) to the Apriete bien todos los tornillos y disfrute Main Panel (12).
-
Página 13: Care And Maintenance
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL.