Pre-Installation; Planning Installation; Tools Required; Package Contents - ETI SH-40-30-840-SV Guía De Uso Y Cuidado

Pre-installation

PLANNING INSTALLATION

WarninG: Shut off power at the circuit breaker or fuse panel before removing the old fixture.
nOTe: Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

Flathead
Screwdriver
Phillips
Screwdriver

PACKAGE CONTENTS

Part Description
A LED Shop Light

HARDWARE INCLUDED

nOTe: Hardware not shown to actual size.
Part Description
AA Mounting Chain with S Hook
BB S Hook (Optional)
CC Cable Tie
Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with package contents list
and hardware contents list above. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact
customer service for replacement parts.
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture based on the type of
ceiling before drilling.
Safety
Goggles
Measuring Tape
A
Quantity
1
Quantity
2
2
1
Ladder
Power Drill with
drill bits
AA
3
Please contact 1-855-384-7754 for further assistance.
Gloves
BB
CC
ETiSSL.COM