Installation Of The Product; Checking The Product - MegaVision MV190T Manual Del Usuario

Installation of the product

ENG

Checking the product

Please check if the product contains the following items. If there are
items missing, please contact the technical services.
1. TFT LCD monitor
2. User's manual (including product warranty).
3. AC to DC adapter.
4. Power cable ( the power cable can be different according to use environment ).
5. Signal Cable ( Monitor Connection Cable )
6. Monitor Base
7. Audio cable
8. AV cable
How to connect monitor stand base
How to install the monitor stand
. Lay the monitor on a flat surface.
2. Attach the monitor to the connecting parts as
shown in the picture.
3. Turn it to the locking point.
To detach it, do it inversely.
Installation
. Turn off the power before connecting to an external device.
2. Power connection, Connect the adapter to the DC jack connected to the
signal cable of the monitor and connect the power cable.
3. Signal connection, This signal input terminal is a D-SUB connector.
Connect the signal cable to the signal input of the computer.
4. Turn on the power of the monitor.
5. Turn on the power of the system that you want to use.
6. Continue with the operation when the screen appears. You can adjust the
desired status of the screen using control buttons at the bottom of the
monitor.
7. Up/Down Monitor Angle should not be over 5/20 degree.
8. To finish operation, turn off the system power and then turn off the power of
the monitor.
4