RuarkAudio R3 Compact Manual De Instrucciones página 20

Bluetooth
Your R3 supports aptX for CD quality streaming. It will
automatically connect to your bluetooth device using the
highest quality connection supported by your device.
Pairing your Bluetooth device
When you have changed the source to Bluetooth, wait
until Awaiting connection... is shown and the indicator
light on top flashes.
Use the Bluetooth setup on your smart device to pair and
connect it to your R3. It will appear in the list of paired
devices as Ruark R3. When connected, BT Connected +
your device name (eg Ozzie's phone) is displayed.
If you do not connect within a few minutes, your R3 will
stop attempting to connect and show No connection. To
connect, select MENU > Connect device.
Connecting your Bluetooth device
As soon as you switch to Bluetooth, your R3 will display
Connecting as it attempts to connect to the last device it
was paired with.
If that device isn't available, it displays Awaiting
connection... To connect to your R3, ensure the
Bluetooth function on your device is on and select Ruark
R3 from the paired devices list on your Bluetooth device.
Play audio
Once connected, audio from your Bluetooth device
will play through your R3. For more information on
playing audio from your Bluetooth device, refer to your
device's documentation.
NOTE: you may need to select your Ruark R3 or
Bluetooth as your audio output on your device.
Pause track
Press and then press again to play.
Skip track
Press or to skip to the next or previous track
Adjust volume
We recommend that you adjust the volume on your
Bluetooth device so that the playback volume is about
the same as other sources. You can then use the volume
control on your R3 to adjust overall playback volume.
Now Playing information
Artist, album and track name will show if your Bluetooth
device and app support Bluetooth metadata. You can
also show the name of the connected device. Select
what is shown from MENU > Info.
EN