Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Maintenance:
Indoor Installation
1.
CARTRIDGE REPLACEMENT:
•
Using an Allen Key, unthread Set Screw from handle
•
Unthread and remove Dome Cap and Cartridge Nut.
•
Remove and replace Cartridge. Use the 2 pins on
the bottom of the Cartridge to seat the Cartridge
correctly.
2. CHECK VALVE REPLACEMENT:
•
Unthread Hose and Check Valve Housing.
•
Remove and replace Check Valves by inserting them
O-Ring side forward into Check Valve Housing.
•
Re-assemble.
3. AERATOR REPLACEMENT:
•
Use Aerator Key to remove and replace Aerator.
4. AERATOR CLEANING:
•
Clean aerator periodically to eliminate any build-up.
Aerator
Aerator
Locking Ring
Aerator Key
Hand Spray Supply Hose
O-Ring
Maintenance:
Outdoor Installation
1.
CARTRIDGE REPLACEMENT:
•
Using an Allen Key, unthread Set Screw from handle
•
Unthread and remove Dome Cap and Cartridge Nut.
•
Remove and replace Cartridge. Use the 2 pins on
the bottom of the Cartridge to seat the Cartridge
correctly.
2. CHECK VALVE REPLACEMENT:
•
Unthread Hose and Check Valve Housing.
•
Remove and replace Check Valves by inserting them
O-Ring side forward into Check Valve Housing.
•
Re-assemble.
3. AERATOR REPLACEMENT:
•
Use Aerator Key to remove and replace Aerator.
4. AERATOR CLEANING:
•
Clean aerator periodically to eliminate any build-up.
Important - Your outdoor Galley BarTap
if temperature falls below freezing in your area.
5. WINTERIZE YOUR GALLEY BARTAP:
•
Turn off water supply under the counter and disconnect
Hot and Cold Supply Hoses.
•
Disconnect Check Valve Housing and Hand Spray
Supply Hose (see picture below); remove both Check
Valves.
•
Open handle and pull out Hand Spray from spout to
drain any water; drain completely.
Dome Cap
Cartridge
Set
Screw
Cartridge
Nut
Check Valve Housing
Check Valve
Hand Spray Hose
4
must be winterized
®
Handle
Allen
Key
Tabla de contenido
