Product Liability; Safety Notices; Further Safety Notices - GEZE Slimchain 230V AC Manual De Instrucciones

Product liability

3 Product liability
à In accordance with the liability of the manufacturer for his products as
defined in the German "Produkthaftungsgesetz" (Product Liability Act),
the information contained in this brochure and in the corresponding
installation instructions of the product (product information and proper
use, misuse, product performance, product maintenance, obligations to
provide information and instructions) is to be observed. Failure to comply
with this information releases the manufacturer from its statutory liability.
à Only qualified personnel who are authorised by GEZE may carry out moun-
ting, function check and maintenance. GEZE shall not be liable for injuries or
damage resulting from unauthorised modification of the equipment.
à GEZE makes no guarantee for combinations with third-party devices. Use
only original GEZE parts for repair and maintenance work as well.
4

Safety notices

To ensure personal safety, it is important to follow these safety instructions.
These instructions must be kept.
The product has not been designed to be used by people, including
children, who have restricted physical, sensory or mental abilities or a lack
of experience and/or knowledge, unless they are supervised by a person
responsible for their safety or have received instructions from that person
as to how the product is to be used.
Do not allow children to play with permanently installed control systems of
any kind and keep remote controls out of reach of children.
People, including children, must be kept out of the way when a switch with
an OFF default setting is activated or when a leaf that has been opened by a
smoke and heat extraction system closes.
4. 1

Further safety notices

Before commissioning of the system, a risk assessment must be carried out in
compliance with the Machinery Directive 2006/42/EC (e.g. on the basis of the
GEZE safety analysis for power-operated windows) and the system must be
given the CE marking in compliance with Annex III of the EC Machinery Directive.
Observe the latest status of directives, standards and country-specific regu-
lations, in particular:
à DGUV regulation 1 "Accident prevention regulations, principles of
prevention".
à DGUV regulation 3 "Accident prevention regulations, electrical instal-
lations and equipment".
à ASR A1.6 "Windows, fanlights, translucent walls".
EN 4
Slimchain 230 V AC