Angelo Po 191BR2EA Manual De Uso E Instalación página 54

7 - Undo the screws (N) and remove the bushes
(P).
8 - Unscrew and replace the threaded rod (Q).
9 - Set the bush (R) at the distance as shown in the
figure.
10 - Reassemble the bushes (P) and tighten the
screws (N).
Important
Lubricate the threaded rod (Q) with Teflon
grease (Tecnolube Seal RHEOLUBE 368F,
OKS 265, etc.).
11 - Reassemble the gear motor (F) and its compo-
nents.
12 - Reassemble the lid (E) and secure it with the
screws provided.
13 - Fit the screw (C) and tighten it.
14 - Replace the control panel (B) on completion of
the operation.
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
IT
work. Never dump non-biodegradable ma-
terials, lubricating oils and non-metallic
GB
DE
FR
ES
English
N Q
P
components (rubber, PVC, resins, etc.) in
the environment. Dispose of them in ac-
cordance with the relevant legal require-
ments.
- 26 -
N R
P
IDM-39616202000.tif