Performax SKU 240-2972 Instrucciones De Operación Y Seguridad página 10

turn the tracking adjusting knob (10) clockwise
1/4 turn.
7) If the sanding belt moves away from the disc,
turn the tracking knob counterclockwise 1/4 turn.
8) Turn switch "ON" and immediately "OFF"
noting belt movement. Re-adjust tracking knob
if necessary.
E1
E2
2. POSITIONING THE BELT BED (SEE FIG.
F1, F2)
The belt bed locking screw locks the belt bed in
a vertical or horizontal position.
To adjust vertical position:
1) Remove work support.
2) Loosen the belt bed locking screw by using
an allen key.
3) Position the belt bed and retighten the hex
locking screw.
10
10
2
F1
F2
OPERATION
1. SWITCH ON/OFF (SEE FIG.G)
To turn the machine on, move the switch to the
"ON" position. To turn it off, move the switch to
the "OFF" position.
To "Lock-off" the machine:
When the machine is not in use and to prevent
unauthorized use, the switch should be locked
in the "OFF" position. To do this, pull the locking
key out of the ON/OFF switch and store the key
in a secure place. With the key removed, the
switch will not operate.
G