DAYRON 26059 Manual Del Usuario página 17

1. Open the cardboard box and remove the components (figure 1).
2. Install the support plate on the ceiling (figure 2).
3. Center the slots in the blades with the heads of the blade set screws.
Slide the blades so that the head of the screws is positioned at the end of
the slot (figure 3).
4. Tighten the screw (figure 4).
5. Remove the screws from the motor connection plate and carefully route
all cables to the connection plate.
6. Align the holes in the back of the LED fixture and assemble the three
screws on the motor connection plate (figure 5).
7. Tighten the three screws on the LED board, link the connector with the
motor wiring. Make sure that the light kit cannot move after tightening the
screws (figure 6).
8. Suspend the motor housing on the bracket plate hook and make the AC
(IN) L, AC (IN) N and Ground connection (figure 7).
9. Tighten the four screws on the support plate to secure the fan (figure 8).
10. Place the panel on the fan (figure 9
WARNING!
Electrical products should not be thrown away with other waste
domestic. Thank you for recycling them at the collection points pro-
vided for this purpose. Contact local authorities or your supplier for
recycling advice. We kindly ask you to recycle the packaging at the
collection points provided for this purpose.