Idiomas disponibles
Idiomas disponibles
ON/OFF Switch
Speed Controller
With the speed controller (3) you can adjust the speed according to application. Select the
appropriate speed setting and make sure the multi tool does not become overloaded and stops
running.
Turn the speed controller to the
desired setting to increase or
decrease the speed. The controller
can be adjusted from 1 - 6. The
speed rate can be changed during
operation as well.
Hint: The required speed rate for cutting or
sanding a workpiece
depends on the material that you
are going to process. For best
performance, make some practical
tests.
Always wear safety glasses, hearing protection, a dust mask and gloves.
WARNING – The user must read instructions the risk of injury. Save all warnings and
instructions for future reference
1. To switch on the multi tool,
push the ON/OFF switch (2)
forwards.
2. To switch off the tool, pull the
ON/OFF switch back.
EN
