Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
FITTING INSTRUCTIONS FOR AKO LIGHTING UNITS USED IN LIFT EMERGENCY LIGHTING SYSTEMS
84
77
111
Fig. 1
Fixing screws
maximum 4mm de diameter.
26
Fig. 2
- Mounting/Connection:
To mount the unit, the glass must be separate from the
base. The base is then surface mounted by way of the
two holes shown in Fig.1.
The cable, after first being passed through the central
hole, is connected to the terminals and the glass is put in
place and securit with the fixing screw.
- Lamps:
AKO-5406: Two dial E10 of 6V 200mA.
AKO-54061: Two spherical E10 of 12V 200mA.
AKO-54062: Two dial E10 of 6V 200mA.
- Dimensions: 111x77x26mm (Fig. 2).
355406002 Rev.00
355406002 REV.00
Hoja 1 de 2
Manuales relacionados para AKO 5406
Resumen de contenidos para AKO 5406
- Página 1 FITTING INSTRUCTIONS FOR AKO LIGHTING UNITS USED IN LIFT EMERGENCY LIGHTING SYSTEMS - Mounting/Connection: To mount the unit, the glass must be separate from the base. The base is then surface mounted by way of the two holes shown in Fig.1.
- Página 2 INSTRUCCIONES PARA LOS PLAFONES AKO UTILIZADOS EN SISTEMAS DE ALUMBRADO DE EMERGENCIA PARA ASCENSORES - Montaje y conexión: Para montar el plafón, se separa el cristal de la base, y se sujeta la base a la pared mediante los agujeros que se indican en la Fig.1.