Tabla de contenido
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount arm assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1
07
3
CAUTION:
Be sure the anchors
the concrete surface.
directly onto concrete surface (no wall covering)
08
C1
are seated flush with
C1
Solid Concrete or Concrete Block Installation
Concrete Installation Kit CMK1 is not included
Contact Customer Service at 888-333-9952 to inquire about
the CMK1 Concrete Anchor Kit.
2
CAUTION:
Never drill into the mortar between blocks.
4
08
09
Tighten the lag screws
snug against the wall plate
CAUTION:
Improper use could reduce the holding power of
the lag screw. DO NOT over-tighten the lag screws.
07
10
002862.eps
only until the washers
09
.
08
76 mm (3 in.)
10 mm
(3/8 in.)
are pulled
10
7
Tabla de contenido
