Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KPHA-DUO
Mechanical daily time switch for DIN rail
1. Technical specifications
Rated voltage:
Frequency:
Max load on changeover contact:
Resistive load:
Inductive load:
Pollution:
Insulation:
Protection category:
Operating temperature limits:
Reference standard for CE mark:
2. Installation
lmportant: installation and electrical connection of the clock must be carried out by skilled people and in
compliance with statutory regulations. The manufacturer declines any liability regarding the use of products
subject to special environmental and/or installation standards. For surface mounting (e.g.wall-mount), prepare
suitable raceways for cables.
Installation in compliance:
* On DIN rail
(in compliance with DIN EN 50 022) in small distribution boards
(in compliance with DIN EN 57 603 or DIN EN 57 659) using clips
* Wall mount
Secure the plastic element provided (fig.1) and clip the switch in place
3. Wiring
Electrical connections must be made only after isolating the 230V-mains supply
230 Vac
50/60 hz
16 (4) A
3500W
1000 W
Normal
Class II
IP40
IP30 (wall-mount with terminal cover)
-10 ºC- +50 ºC
LVD EN60730-1 EN60730-2-7
EMC EN60730-2-7
www.grupotemper.com
Tabla de contenido
