Assembly; Mode Of Operation; Make A Direct Call; Personal Alarm - Disty Notruf Instrucciones De Operación

Assembly

Now mount the device, for example on a plastic tile using two
sheet screws. For other assembly locations, for example on
the wall or on a wooden board, please use the appropriate
materials.
EN
As an example, here are the working steps for
assembly on the wall:
1. Drill two holes with a diameter of 6 mm at a distance
of 48 mm into the wall.
2. Insert the anchor bolts.
3. Now stick the screws through the mounting holes on the
distyNotruf stationär
the device.
4. Check for proper
functionality by
pushing the button!
18
and tighten the screws to mount
56,3
48,3
23
Operating instructions

Mode of operation

Make a direct call

distyNotruf stationär
Press the alarm button.
the first of the pre-programmed telephone numbers. The red
LED flashes and shows that the connection is being established.

Personal alarm

This feature is not available in all devices.
Although the device only has a single button, it is still possible
to ring a specific second alarm number. The required settings
for this can be found in the "ProgrammerApp" under the tab
„Configuration 2".
To dial this second number, you need to press the emergency
call button twice and quickly. The first emergency call number,
which is activated by pressing the button for at least 1 second,
is not affected by this.

Cancelling a direct call/an alarm

If you accidentally trigger an alarm, simply press the alarm
button again.
Operating instructions
is now calling
EN
19