Maintenance And Cleaning; Storage And Transportation - Ibx HM01 Manual Del Usuario

6. Faults
In the event that:
•
The equipment does not turn ON
- Make sure the power line is plugged in
- Check for bad connection of the cable
•
The temperature cannot reach the set point or stirring cannot be started by adjusting the control knob
- Check whether the heating wire broke during transportation
- Otherwise, the heating resistance of the equipment may be damaged.
If these faults are not resolved, please contact your supplier.

7. Maintenance and Cleaning

•
Proper maintenance can keep instruments working properly and lengthen their lifetime.
•
Do not spray cleanser directly on the instrument when cleaning.
•
Unplug the power line before cleaning.
•
Only use recommended cleansers:
Dyes
Construction materials
Cosmetics
Food products
Fuels
•
Before using any other cleaning or decontamination methods, verify with the manufacturer that such
method will not harm the instrument.
•
Wear proper protective gloves when cleaning the instrument.
•
In order to avoid contamination from hazardous substances, the instrument must be cleaned and put into
the initial packaging before sending it in for repair.
•
Use the instrument in a dry, clean room with a stable temperature.

8. Storage and transportation

•
Keep the equipment in a dry and clean room with good ventilation and no corrosive gas.
•
During transportation, protect it from wetting by the rain and avoid violent collision.
Isopropyl alcohol
Water containing surfactants / Isopropyl alcohol
Water containing surfactants / Isopropyl alcohol
Water containing surfactants
Water containing surfactants
Table 5
9