Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Settings menu
5
New session file: create a new session file
Reading modes
Single reading mode (left): Pressing the ON/reading button, only one EIC is read (to read
another one, click the reading button again).
Continuous reading mode (right): pressing the reading button the scanner continues reading tags
until the reading button is pressed again (or time-out occurs).
Supported USB Interfaces
To read the EICs stored in the reader's memory via USB, the reader must be turned off.
If the reader is turned ON while connected to a PC, the reader will behave as a PC peripheral
and EICs will be sent to the PC via the USB cable at each reading.Two interfaces are supported:
Keyboard wedge (KWG)- left: the reader is seen by the PC as a keyboard. The codes will be
displayed on the PC screen in any window where a mouse cursor is active. No configuration on
the PC is needed.
Virtual Com Port (COM) - right: the reader is connected to one of the Virtual Com Ports of the
PC and sends the codes using RS232 protocol. Codes are received on a hyper-terminal or using
Datamars S-ID companion SW (requires a specific PC driver that can be downloaded from
www.datamars.com).
EIC format: 8 formats are available to store and transmit the EIC.
Audio ON/OFF: Acoustic signals can be enabled or disabled.
Display Brightness
Date and Time
Bluetototh (optional): bluetooth settings (optional) allow you to establish a connection and
communicate via Bluetooth with other devices such as scales, printers, computers and mobile
devices. For full instructions on how to use the Bluetooth functionality, please refer to the
Application Note available on Datamars website www.datamars.com
Firmware version
6
TracKing-1_EN_FR_ES_IT v.3.0
All manuals and user guides at all-guides.com
Select the arrow icon to navigate in the menu.
Press the ON button to select the desired setting.
Select the home icon to return to the home menu.
5
Tabla de contenido
