Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Euro Waxer by Wagan Tech
• Do not use tool if the switch does not turn it on or off. Any tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any
adjustments, changing accessories or storing the tool. Such preventative
safety measures reduce the risk of starting the tool accidentally.
• Store idle tool out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
• Maintain tools with care. Properly maintained tools are less likely to bind
and are easier to control.
• Check for misalignment or binding of moving parts, breakage of parts
and other conditions that may affect the tools operation. If damaged,
have the tool serviced before using. Poorly maintained tools cause many
accidents.
• Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool may become
hazardous when used on another tool.
5. Service
• Only qualified repair personnel must perform tool service. Service or
maintenance performed by unqualified personnel could result in a risk of
injury.
• When servicing a tool, use only identical replacement parts. Follow
instructions in the "Maintenance" section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of electric shock or injury.
Specific Safety Rules
• Do not run car when using buffer/polisher in enclosed area.
• Do not put fingers, objects or tools between guard and pad holder while
machine is running.
• Always start and stop polisher against car surface. Otherwise the bonnet
could be thrown from the pad.
• Keep children at a safe distance from the work area.
www.wagan.com
3
User's Manual—Read before using this equipment
• Avoid accidental starting. Keep fingers away from switch when carrying
plugged in polisher. Disconnect tool when not in use or when servicing with
replacement parts.
• When not in use keep tool locked up (or high and dry) and out of reach of
children.
• Do not force the tool. Grip the polisher firmly but with downward pressure.
Pressing too hard will slow down the machine's movement and affect the
quality of the work.
• Do not operate tool if guard is damaged.
Tool Assembly
TO REMOVE PAD: Use ½ inch socket wrench to remove the center bolt. Insert
flat blade screwdriver between polisher and the pad as shown. Turn bolt
clockwise. To replace pad turn bolt counterclockwise.
Operation
1. Fit a clean bonnet on the pad.
2. Spread a teaspoonful of wax evenly over bonnet
surface.
3. Apply 2 swirls of cleaner/glaze over the wax on
the bonnet, NOT DIRECTLY ON THE CAR.
4. For additional applications of wax and cleaner/
glaze, use 1 swirl. The bonnet will not absorb as
much when reloading. The most common error is
applying too much wax and cleaner/glaze.
© 2010 Wagan Corporation.
All Rights Reserved.
Wagan and wagan.com are trademarks used by Wagan Corporation.
4
Tabla de contenido
