IBP BP 603 Manual De Instrucciones página 51

All manuals and user guides at all-guides.com
BP 603 GB_neu 04.01.2005 10:45 Uhr Seite 21
an error is displayed 11
Error Fault/Cause Solution/Explanation
The pulse frequency You have moved your arm or body Do not move while the reading is
is higher or lower briefly during the reading or you being taken. Do not talk.
than the average have spoken.
value.
You have taken the reading Do not take any reading immediately
immediately after physical exertion. after physical exertion.
The unit switches off This is built into the system. Press the START/STOP key again
automatically. and re-take the reading.
The unit continues This is normal. If the user's blood
to pump up while pressure that is being measured is
the reading is being higher than the initial value of the
taken. sleeve pressure, the unit will
automatically continue to pump.
The pressure build-up will occur in
stages of 20 mmHg, until a suitable
pressure for the reading has been
reached.
The sleeve is not correctly fitted or is Fit the sleeve correctly
not tight enough. (see Ch. 9.1, pp. 13-14).
21