Safety Instructions; Putting Into Operation - EHEIM classic 2215 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
All manuals and user guides at all-guides.com
English
Many thanks
for purchasing your new EHEIM classic external filter. It gives you optimum
performance with excellent reliability and great effectiveness.

Safety instructions

Only for use in rooms.
All electrical equipment in the water must be disconnected from the
mains during care and maintenance work.
The connecting line of this device can not be replaced. When the line is
damaged, the device must no longer be used. Contact your specialist
dealer or your EHEIM service centre.
The product is qualified in accordance with the respective national re-
gulations and guidelines and meets EC standards.
geprüfte
Sicherheit
External filter 2215 / 2217
Function
A
Pump head
suction side hose connection
strainer
suction cups with clips
Place bottom lattice screen in position with feet down.
B
Model with filter pads: Rinse all filter pads under running water and in-
sert them into the filter canister according to the drawing:
filter pads blue,
b
black as a top layer. The carbon filter pad adsorbs possible dissolved
harmful substances after newly installing the filter. After a working time
of approx. two weeks, the carbon filter pad should be removed.
B
Model with filter media: Rinse all filter media under running water and
1
insert them into the filter canister according to the drawing:
MECH,
1 coarse filter pad blue,
b
STRAT,
1 fine filter pad white,
d
layer. After a working time of approx. two weeks, the carbon filter pad
should be removed.
Installation
C
Put on the pump head and examine the o-ring for correct fitting. Close
the clips.
D
Place filter underneath aquarium – it must be below water level.
E / F Fit outlet pipe as per drawing
strainer (drawing A) and attach to side of aquarium with 2 suction cups
and fit hose connections to filter: suction side on bottom intake nozzle,
pressure side on pump head.
G
Fasten hoses with clamping nut.

Putting into operation

H
There are 3 ways to prime the filter. 1) With the starter bulb (order no.
filter canister
pressure side hose connection
lattice screen
outlet pipe.
1 fine filter pad white and
EHEIM SUBSTRATpro or SUB-
c
1 carbon filter pad black as a top
e
or
. Assemble suction pipe and
suction pipe
6 coarse
a
1 carbon filter pad
c
EHEIM
a
Tabla de contenido
loading

Este manual también es adecuado para:

2217

Tabla de contenido