RODCRAFT BC2-2S Manual página 5

Dear customer!
Rodcraft Pneumatic Tools thanks you for the purchase of one of our products andinvites you to read this user manual.
It contains all information required for the proper use of this device. We recommend you to read it completely and follow the given instructions carefully.
Please keep the user manual in a good condition. The contents of this manual may be updated without prior notice and without further obliga¬tions, so that
changes and improvements can be inserted into already distributed copies.
It is our goal to manufacture products, with which you can work as safely and efficiently as possible. For your own safety, it is vital that you exercise caution
and good judgment in handling this product and other tools. These notes on safety contain some of the most important sources of danger; however, they
cannot cover all possible hazards.
Copying or translating any part of this manual is prohibited without the prior written permission of the manufacturer
1. Technical Data (Fig.01)
Model Lifting capacity
Unit [kg]
BC2-2S 2000
BC2-2L 2000
BC2-3L 2000
Static coefficient test : 1.5 / Dynamic Coefficient test : 1.25
2. Application and Function
• A balloon jack is a device which you use for lifting a car in order to ensure the accessibility for repair and maintenance work.
• A balloon jack is only a lifting device. Do not misuse the jack.
• Please observe the product safety information!
3. Inspection
• Open the packing and check that the equipment has not been damaged in transit and that you received all the parts specified in the shipping documents.
Before bringing the equipment into service conduct a visual inspection in order to determine leaks, damages, loose or missing parts.
4. Startup and Operation
• Connect the jack to the air supply.
• Pull the right trigger ,"Up" position, the load is lifted to the desired level.Secure with support stand.(Fig.03)
• The integrated overload safety device (relief valve) ensures that the lifted load never exceeds the capacity of the jack
• To lower the load, pull the left trigger , "Down"
5. Maintenance
• All moveable parts must be greased regularly with common multi-purpose grease. Always keep the unit clean and away from aggressive chemicals. Do
not leave the unit outdoors.
• Maintenance and repair of the equipment only by technical maintenance staff.
6. Disposal
• The disposal of this equipment must be in accordance with the legislation the respective country.
• All damaged, strongly worn out or improperly functioning devices HAVE TO BE TAKEN OUT OF OPERATION.
The repair of the equipment should be performed only by qualified technical staff.
Use the equipment only for its intended use as described above, any other use is explicitly excluded! For injuries and damages resulting from
improper use, misuse or infringement of safety instructions, we accept no liability or warranty.
7. CE Certification
Valid for:
BC2-2S/BC2-2L/BC2-3L
Origin of the product:
Made in China
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating :
to „Machinery":
applicable harmonised standard(s) :
Technical File
CP
available at the
ZAC de la Lorie -38, rue Bobby Sands, B.P10273
EU Techno-
44818 Saint-Herblain Cedex, France
center
Rodcraft Customer Center
Company name
Langemarckstr.35 bis
and address:
45141 Essen- Germany
We hereby declare that the following described machine complies with the general safety and health requirements of below mentioned EU directives due to its design and
conception and the type circulated by ourselves. This declaration becomes invalid if the machine is modified without our approval.
Pressure Stroke Amin
[bar] [mm] [mm]
7-10 235 115
7-10 235 115
7-10 300 200
position.(Fig.03)
EC DECLARATION
2006/42/EC (17/05/2006)
EN 1494:2000 + A1:2008
Visit our Internet presence at www.rodcraft.com
Here you can also download our manuals.
With further questions contact your nearest Rodcraft branch or the authorized dealer.
RODCRAFT PNEUMATIC TOOLS
EN
Amax B C
[mm] [mm] [mm]
350 265 185
350 265 185
500 250 185
Nicolas Lebreton
D E F
[mm] [mm] [mm]
82 98 80
82 98 80
82 98 60
Serial: 00001 to 99999
44818 Saint-Herblain,
Place and date of
issue:
R&D Manager:
G Net Weight
[mm] [kg]
-- 15
1000 18
1000 19
France
07.15.2014
5