Idiomas disponibles
Idiomas disponibles
1
Tube
• Attach plastic tube to neoprene tube. Tighten screw in
center of the bracket.
Wall Clips
• Attach wall clips. Secure with screw & anchors.
Fitting The Tube
• Determine desired length of tube & cut to size (HINT: do not cut tube too short. Leave excess
and trim a second time).
• Insert wire, bend tube around the fixture rim directing the liquid downward. See Fig. 1,2 or 3
FIG. 1
Installation
Mounting Point
• Drill 1/4" (6 mm) hole in wall, insert anchor and screw in.
Tighten half way.
• Hang dispenser on top screw & do same for bottom
mounting point.
• Tighten screws fully.
2
4
FIG. 3
FIG.
2
3
Plastic
tube
4
