Cata & Can Roca MT 9011 PRO BK Instrucciones Para La Instalación, El Uso, El Mantenimiento página 21

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN
power supply.
- Disconnect the oven from the power supply when not in use and before
cleaning.
- Warning: This appliance is supplied with a three core supply cord and
must be connected direct to the mains electricity supply via a omni-polar
or double pole switch having a 3mm minimum contact gap on each con-
nector.
- The fused spur should be installed in an easily reachable place so that
in case of emergency the appliance can be disconnected from power im-
mediately.
- The fixed wiring must be protected against heat surfaces.
- Do not hang any objects on the handle of the oven door.
- Caution: Do not cover the bottom of the oven with aluminium foil or other
objects. There is a risk of fire and damage to the enamel in the oven!
- Do not allow aluminium foil, plastic, paper or fabric contact with heating
elements. Never leave the appliance unattended during use, especially
when cooking with flammable substances (e.g. hot oil, fat, etc.).
- Do not store or never use harsh chemicals, sprays, flammable or non-
food in or near the oven.
- This oven is designed specifically for heating or cooking food. The use of
corrosive chemicals in heating or cleaning will damage the unit and may
cause injury.
- Should any food inside the oven catch fire, keep the door closed. Switch
the oven off and disconnect the power supply. Always exercise caution
when opening the door.
- Move to the side, and open the door slowly to vent the hot air and/or
steam. Make sure your face is away from the opening and make sure
there are no children or pets near the oven.
- Only use utensils that are suitable for use in this type of oven.
- The appliance must not be installed behind a decorative door in order to
avoid overheating.
21
Tabla de contenido
loading

Productos relacionados para Cata & Can Roca MT 9011 PRO BK

Tabla de contenido