Tabla de contenido
Idiomas disponibles
Idiomas disponibles
when chiseling. Expressive force does not
speed up the work.
maintenance
remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
tRoUbLesHootinG
1. If your hammer does not start, check the plug
on the mains supply first.
2. If your hammer becomes too hot in use, set
the hammer switch to the drill mode and allow
your drill to operate at maximum speed without
load for 2 minutes.
3. If your hammer work efficiency is too low,
please add sufficient grease in the grease box.
4. If your hammer use in low efficiency, please
check whether the tool is blunt.
5. If a fault can not be rectified return the tool to
an authorized dealer for repair.
enviRonmentaL
pRotection
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling
advice.
GUaRantee
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 24
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1. Misuse, abuse or neglect.
2. Trade, professional or hire use.
3. Repairs attempted by unauthorised repair centres.
4. Damage caused by foreign objects,
substances or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est 08740
Sant Andreu de la Barca Barcelona-España
29
Tabla de contenido
