Setting
The washing machine should be
l
installed in its final position such
that the water fill hose is not
kinked
or
corrugated drain hose should be
inserted into suitable drain pipe of
between 50 cm and 85 cm height
above the floor using the curved
drain hose support. If an under
sink connection is used the drain
hose must be routed above the
sink overfill opening to prevent
back siphoning. Care must be
taken to avoid kinking or trapping
the drain hose (fig. 8).
Level the appliance using the
l
feet as illustrated in fig. 9:
a. turn the nut clockwise to
release the screw;
b. rotate the foot to raise or lower
it until it touches to the floor;
c. lock the foot, screwing in the
nut, until it tightens against to
the bottom of the washing
machine.
Plug in the appliance.
l
WARNING:
Contact the Customer Service
Centre should the power cord
need replacement.
Installation
faults
covered by the manufacturers
warranty.
trapped.
The
are
not
8
2,5 mt
max
*
ACCESSORY SOLD SEPARATELY
9
47
min 4 cm
min 50 cm
max 85 cm
A
B
C