Glaziar Predator SO2000UV Manual De Uso página 29

5- Remove backing from mounting
7- Secure the mounting plate using (8)
9- Secure the unit to the mounting
29
plate adhesive gasket
#8 self-tapping screws
plate with (4) #8-32 nuts.
6- Center openings and press mounting
plate onto duct. The adhesive gasket will
hold the mounting plate in place
8- Insert unit into opening. Be sure the
air will pass though the GLAZIAR PCO
cell honeycomb matrix.
10- Plug unit into working power receptacle..
Hard wiring unit into HVAC system
should be done by a licensed HVAC
installer or electrical contractor only.
www.glaziar.com / [email protected]