MoJack PRO Instrucciones De Montaje Y Funcionamiento página 11

MoJack WorkBench
Operating Instructions for use with MoJack PRO
STEP 3
Raising the Mower
• Raise the mower by rotating the Winch Handle clockwise.
Do not attempt to lift more than 200 lbs.
The MoJack must be used on a solid level surface.
The mower engine must be turned off.
If using the WorkBench Inserts, do not install past safety sticker.
STEP 4
Locking Carrier into the Safety Ratchet
• As the Carrier raises, the clicking sound indicates that the
Safety Ratchet is functioning properly. Once the mower is
at the desired working height, rotate the Winch Handle 1/2
turn counterclockwise to release the tension off of the
Lifting Strap and allowing the Carrier to rest firmly on the
Safety Ratchet.
STEP 5
Lowering the Mower
• Turn the Winch Handle 1/2 turn clockwise and squeeze the
Grip Handle and Ratchet Release Handle together. Keeping the
Grip and Ratchet Release Handles squeezed together, turn the
Winch Handle counterclockwise until the Wheel Pads are firmly
on the ground.
Grip Handle
Ratchet
Release
Handle
Winch Handle
Safety Ratchet
1/2 Turn
Winch Handle
Lifting Strap
1/2 Turn
Winch Handle
Winch Handle
11